10-100A 12V/24V Dual USB LCD Solar Panel Battery Regulator Charge Controller

Description

Feature:

1. Build-in industrial micro controller

2. Fully 3-stage PWM charge management

3. Big LCD display, all adjustable parameter

4. Dual mosfet reverse current protection, low heat production

5. Dual USB output, the maximum current of 2.5A, to support Apple’s mobile phone charging

6. Build-in short-circuit protection, open-circuit protection, reverse protection, over-load protection

7. Suitable for solar green light, solar light boxes advertising board, solar insecticidal lights, housing solar power generation system, marine solar power generation system, outdoor survival solar power generation system

 

Specification:

Shell Material	Plastic
Back Board Material	Iron
Color	Amber Yellow
Display	LCD Screen
Batt Voltage	12V/24V auto
Charge Current	10A/20A/30A/40A/50A/60A/70A/80A/90A/100A
Discharge Current	10A, 10A, 10A
Self-consumption	＜10MA
Operating Temperature	-35~+60
Max Solar Input	12V battery, the highest 23V
Float Charge	13.7V(defaul, adjustable)
Discharge Stop	10.7V(defaul, adjustable)
Discharge Reconnect	12.6V(defaul, adjustable)
Charge Reconnect	13V
Voltage of Open Light	Solar Panel 8V(Light lights delay)
Voltage of Close Light	Solar Panel 8V(Light off delay)
USB Output	2 way USB output, 5V/2.5A(MAX)
Size	(L)X(W)X(H) 13.3x7x3.2cm

 

System Connection:

1.Connect the battery to the charge regulator-plus and minus

2.Connect the photovoltaic module to the regulator-plus and minus

3.Connect the consumer to the regulator-plus and minus

NOTE: The reverse order applies when deinstalling, an improper sequence order can damage the controller

 

Safety Instructions:

1.Make sure your battery has enough voltage for the controller to recognize the battery type before first installation

2.The battery cable should be as short as possible to minimize loss

3.The regulator is only suitable for lead acid batteries: OPEN,AGM,GEL, it is not suited for nickel metal hydride, lithium ions or other batteries

4.The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator

 

Notice:

1.Please allow slight deviation of measurement due to manual measurement.

2.Due to different producing batches, product details might be a little different.