10/20/30A 12/24V LCD Dual USB Solar Panel Battery Regulator Charge Controller

Description

Size Conversion

Inches

Centimeters

Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.

Feature:

● Build-in industrial micro controller

● Fully 3-stage PWM charge management

● Big LCD display, all adjustable parameter

● Dual mosfet reverse current protection, low heat production

● Dual USB output, the maximum current of 2.5A, to support Apple’s mobile phone charging

● Build-in short-circuit protection, open-circuit protection, reverse protection, over-load protection

● Suitable for solar green light, solar light boxes advertising board, solar insecticidal lights, housing solar power generation system, marine solar power generation system, outdoor survival solar power generation system

 

Specification:

Shell Material	Plastic
Back Board Material	Iron(10A-60A)
Color	Black+Blue
Display	LCD Screen
Batt Voltage	12V/24V auto
Charge Current	10A, 20A, 30A, 40A, 50A, 60A (pls choose which current you need)
Discharge Current	10A, 10A, 10A
Self-consumption	＜10MA
Operating Temperature	-35~+60
Max Solar Input	12V battery, the highest 23V
Float Charge	13.7V(defaul, adjustable)
Discharge Stop	10.7V(defaul, adjustable)
Discharge Reconnect	12.6V(defaul, adjustable)
Charge Reconnect	13V
Voltage of Open Light	Solar Panel 8V(Light lights delay)
Voltage of Close Light	Solar Panel 8V(Light off delay)
USB Output	2 way USB output, 5V/2.5A(MAX)
Size	(L)X(W)X(H) 13.3x7x3.2cm

 

System Connection:

1.Connect the battery to the charge regulator-plus and minus

2.Connect the photovoltaic module to the regulator-plus and minus

3.Connect the consumer to the regulator-plus and minus

NOTE: The reverse order applies when deinstalling, an improper sequence order can damage the controller

 

Safety Instruction:

1.Make sure your battery has enough voltage for the controller to recognize the battery type before first installation

2.The battery cable should be as short as possible to minimize loss

3.The regulator is only suitable for lead acid batteries: OPEN,AGM,GEL, it is not suited for nickel metal hydride, lithium ions or other batteries